RPi GPIO Status LED and Terminal Block for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Terminal Blocks

RPi GPIO Status LED and Terminal Block Burst Caps for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Terminal Blocks

SPECIFICATIONS

RPi GPIO Status LED and Terminal Block for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Terminal Blocks

Description:

• Product Name:Terminal block hole module
• Material: Copper
• Rated Current: 3 A
• Meter: 26.0
• Voltage: 3.3 volts
• Product Weight:40g

Features:

• The product is soldered and assembled. For Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
• GPIO status LED and power 5V/3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIO green.
• The position of the LED corresponds to the position of the 2x20pin connector of the Raspberry Pi, and the logic level of the GPIO can be observed very quickly and intuitively.
• The drive current for each LED is only 0.1mA, so you don't need to worry about it affecting the read and write status of the GPIO.
• Terminal pitch 3.5mm/0.138in, wire size range from 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin and cage copper, 2 x 20 pin extension pins, 8mm/0.32in high.

Package Include:

• 1 x Terminal Block Breakout Module
• 4 x M2.5x16mm nylon brackets
• 4 x M2.5x6mm nylon brackets
• 4 x M2.5 nylon nuts

(Note: This product does not include a Raspberry Pi board).

Notes:

1. Due to the difference between different monitors, the pictures may not reflect the actual color of the item.

2. Please allow for slight errors due to manual measurement.