Weather station kit with ESP8266-12E. This is for experimenters and hobbyists to learn IoT and sensor technology and how to blend information sources. It is a challenge for most. Don't expect immediate results -- expect a learning experience and some frustration as you solve problems and coding challenges.
See our RV and Outdoors blog for an article on temperature monitoring and RV skirting.
1.The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world - it may be that your relatives or friends live there.
2.The device uses sensors DHT11, BMP180, BH1750FVI to collect temperature, humidity, Atmospheric Pressure, and light data. The weather station reads data indoors via sensor every 5 seconds and uploads it to the Internet every 60 seconds. You can see real-time data charts from your phone or computer. Of course, you can modify the code to implement different functions.
3.ESP8266:CP2102 chip inside, Micro USB,4MB flash, full I/O port, and wireless 802.11 supported IOT platform Arduino compatible.
4.DHT11 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor. The simple communication protocol greatly reduces the programming effort required.
5.BMP180:high-precision, small size, ultra-low power 3μA pressure sensor.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors.Pressure range: 300 ~ 1100hPa. 6.BH1750FVI: Digital Light intensity Sensor. Direct digital output, the complex calculation is omitted, omitting calibration.
7.OLED Yellow Blue Display:0.96" SSD1306 128X64 Yellow&Blue OLED LCD Display with I2C IIC SPI Serial.
We have prepared the weather station hardware, and a free guidance manual, demo code, burning tools, etc. The necessary class libraries are already on
CD-ROM disk, or contact us, we will send a download link to you.
Guidance Manual Catalog:
Overview：This manual describes how to make a miniature weather station by Arduino IDE
Step 1: Install USB-To-Serial
Step 2: Install Arduino IDE for ESP8266
Step 3: Burning Firmware to ESP8266
Step 4: Connecting Components
Step 5: Register OpenWeatherMap, Thingspeak new account
Step 6: Import WeatherStation code in the Arduino IDE
Step 7: Add Library
Step 8: Modify File WeatherStation.ino (Arduino Compiler extension)
Step 9: Set the Board and Port again
Step 10: Burn code to ESP8266
Step 11: Result
AT-Firmware in Guidance Document:
Library attachment in Guidance Document:
esp8266-weather-station-master.zip(WeatherStation Source Code)
Tools in Guidance Document:
1xGuidance document CD-ROM
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Please allow slight dimension difference due to different manual measurements.
Brand Name: ACEHE
Model Number: OTHER
Power Type: None
Is Smart Device: No
Accessory Type: Arduino
Compatible With: Arduino